Visit our homepage.YAV Family Instruments and Switching boards.


The switching, stimulus, acquisition & analysis boards from the YAV family, fit perfectly the Virginia Panel high reliability Mass Interconnect receivers for ATE systems. (More on VPC Interfaces >>>>)
A wide range of complex ATE systems can be easily configured if YAV boards are used.
Among the YAV Range off boards, we find boards for switching, voltmeter, DI, DO, AI, AO, PWM, etc. basically all common functionalities needed in a Test System are covered.  
An introduction video can be watched here!!

All YAV boards can be connected to a PC via a simple two wire CAN-Bus interface, optional USB interface is available.
All YAV boards include labview drivers and virtual instruments to control each board directly through a PC.
Optional software (PHY 6) is available to quickly develop your own test program. 
You can build quickly and reliable Test system with the YAV technology. If needed you can add other available modules from 6TL or third party vendors to build any functional test system from Bench-top to rack or even full in-line systems, using the same technology. More>>>>


Table top tester using Yav Boards and a VPC G6 Interface. This setup as an universal cable testers, including 1500V testing.

Download the Brochure.
from our download page.

More>>>>>


View more sample test systems here >>>>>

How to build a Functional tester with our YAV Boards explained.>>>

Browse the 6TL engineering catalogue,
The Engineering Source for Electronics Test.


Sample functional tester using YAV Boards and a VPC G12 Interface, with servo controlled pusher system.


Download specifications.

YAV90PIN  (Switching)
  • 12 Power relays
  • rated 8A, 250VAC
  • Rear connections for
    General Inhibited Input
  • Can Bus control
  • LabView Drivers

YAV91X12  (Switching)
  • 12 Power relays
  • rated 5A, 250VAC
  • Can Bus control
  • LabView Drivers


Download specifications.

YAV904X8  (Switching)
  • Multi configurable
  • 4x8 two way
  • 150V
  • 10 MHz
  • Can Bus control
  • LabView Drivers


Download specifications.

YAV90128  (Switch/Matrix)
  • Multi configurable
  • Matrix / Switch
  • 8x8 and 4x16
  • 100V   -  10MHz
  • Can Bus control
  • LabView Drivers


Download specifications.

YAV90132  (Switching)
  • 28 NO/NC relays
  • 1x4 NO relays
  • 150V
  • 10 MHz
  • Can Bus control
  • LabView Drivers


Download specifications.

YAV90HVT   (HV Switching)
  • Switching Relays
  • 1500V
  • Isolation Multimeter
  • Can Bus control
  • LabView Drivers


Download specifications.

YAV90832  (I/O Board)
  • Multi Function
  • 16x Analogue Inputs
  • 24x Digital Inputs adj.
  • 32x Digital Outputs
  • 4x Analogue Outputs
  • 4x PWM Output
  • Can Bus control
  • LabView Drivers


Download specifications.

YAV91616  (Audio/Video)
  • 9x16 Channels
    Video Matrix
  • 9x Input, 16x Output
  • 12x16 Channels
    Audio Matrix
  • 12x Input, 16x Output
  • 6x Analogue Outputs
  • Can Bus control
  • LabView Drivers


Download specifications.

YAV90096  (I-O Board)
  • Programmable Voltage
  • Bidirectional
  • Up to 96 Current Sink or source Input/Outputs
  • Can Bus control
  • LabView Drivers

Used as In-Circuit test board.



Download specifications.

YAV90PNE    (Pneumatic)
  • Pneumatic Switch
  • 10x electro valves
  • All switches monitored
  • 2x Digital Inputs.
  • 2x Digital Outputs
  • 1x Analogue Output
  • Pressure switch Integrated.
  • Can Bus control
  • LabView Drivers


Download specifications.

YAV90CLR  (LED Detection)
  • 16x Optical Inputs
  • Colour measurements
  • Intensity measurement
  • On-board Calibration
  • Ideal for LED Testing
  • Can Bus control
  • LabView Drivers


Download specifications.

YAV9COM6  (Interface)
  • Comm interface
  • 6x 9Pin Sub-D
  • 1x RJ45
  • 2x USB
  • 1x Two pole screw type terminal block.



Send me the specifications.

YAV91616  (Multiplexer)
  • HDMI Multiplexer
  • 9x16 Chnlís video matrix

  • 12x16 Chnlís audio matrix

  • 6x Analog Outputs

  • VPC Tripaddle Module
  • Can Bus control
  • LabView Drivers

Specifications on request.


Download specifications.

7100 60E1  (Servo Pusher)
  • 19" Rack Pusher System
  • Autonomous Servo Drive
  • 4U Height
  • 3x programmable levels
  • Linear precision guides.
  • PCB size 450x450 or 500x650mm
  • Can Bus control
  • LabView Drivers

Sample configuration ->

Using YAV Boards  ->

 and a VPC Interface,  ->

Type G10.

YAV Boards
+
VPC
Receiver
=
Basic
ICT &
Functional
Test system.

More on VPC>>>